Tag Archives: air compressor

China factory Compressor Air Compressor Direct Compressor Air CZPT wholesaler

Product Description

COMPANY PROFILE

KY-200KYG Air Compressor (can be customized) :

GENERAL FEATURES:
Permanent magnet inverter compressor because of its energy saving and high efficiency has become a hot and bright spot of the industry, the original air compressor energy consumption on the market, is gradually being the permanent magnet inverter compressor to replace or replacement, users can directly bring cost saveing of 20%-40%.
With the development of science and technology, air compressor is widely used in many industries such as machinery, metallurgy, building materials, electric power, chemical industry, food, textile and so on. However, the air compressor belongs to the high energy consumption equipment, power consumption in some industries accounted for more than 30% og the power consumption of production, it is commonly known as “electric tiger”.
SPECIAL FEATURES:
1,AIR PRESSURE STABILLTY
Due to the use of screw air compressor variable frequency stepless speed regulation characteristics of inverter, inverter controller or regulator through internal PID, can smoothly start; on consumption volatility is relatively large occasions, and can quicklyh adjust the response. Compared with the upper and lower limit switch control of the power frequency operation, the air pressure stability increases exponentially.
2,START NO IMPACT
Because the transducer itself contained the function of soft starter, starting current within the maximum rated current of 1.2 times, compared with the start frequency in general more than 6 times the rated current, start a little impact.
This impact is not only on the grid, the impact of the entire mechanical system, but also greatly reduced.
3,VARIABLE FLOW CONTROL
Power driven air compressor can only work in an exhaust, inverter air compressor can work in a wide range of exhaust. Frequency converter is based on the actual use of gas in real time to adjust the motor speed to control the amount of exhaust.
When the air volume is low, the air compressor can be automatically dormant. thereby greatly redcing the energy loss. The optimized control strategy can further improve the energy saving effect.
4,AC POWER SUPPLY VOLTAGE BETTER
Because of the over modulation technology of the inverter, the output voltage of the motor can be output when the voltage of the AC power supply is low, and the voltage of the output to the motor is too high.
For the generation of power, frequeucy conversion drive can show its advantages.
5,AC POWER SUPPLY VOLTAGE BETTER
Most of the working condition of the frequency conersion system is lower than the rated speed of the work, the host machine noise and wear down, prolongmain- tenance and service life.
If the fan is also driven by frequency conversion, can significantly reduce the nosie of air compressor work.

TECHNICAL PARAMETERS:

Model	Power	Pressure (Mpa)	Air flow	Noise	Stage	Exit pipe diameter	Weight (KG)	Dimensions (mm(LxWxH)
PE-10AVF	7.5	8	1.0	60±2	Single grade	3/4	280	1000600100
		10	0.8
PE-20AVF		8	2.2	60±2	Single grade	1	480	11508001280
		10	1.8
PE-30AVF	22	8	3.8	62±2	Single grade	11/4	520	11508001280
		10	3.0
PE-40AVF	30	8	5.0	63±2	Single grade	11/4	550	11508001280
		10	4.4
PE-50AVF	37	8	6.8	63±2	Single grade	11/2	650	130010001450
		10	5.4
PE-60AVF	45	8	8.0	65±2	Single grade	11/2	750	130010001450
		10	6.8
PE-75AVF		8	9.7	65±2	Single grade	2	1200	170012701500
		10	8.6
PE-100AVF	75	8	13.2	65±2	Single grade	2	1350	170012701500
		10	16.1

ENERGY-SAVING EFFECT OF TWO-STAGE COMPRESSION:

According to the engineering thermodynamics theory, it is the most economical for the compressor with isothermal compres-
sion.Two-stage oil-injection screw air compressor is designed based on the above theory, it fully improves the cooling function through oil injection during the two-stage compression, plus the inter-stage cooling, by ensuring the temperature is above the pressure dew point, it can be close to isothermal compression as possible, so as to achieve the energy-saving effect.
At the same time, due to low compression ratio of the two-stage airend, the “internal leakage”is largely reduced in the compression process compared with the single-stage compression airend with the same power and same discharge pressure.On the contrary, the diplacement is increased, which means that the efficiency is increased, and the specific power is reduced.
Compared with the ordinary two-stage permanent magnetic compressor on the market,Moair uses the two-drive and two-stage compres- sion, which directly avoids the power loss inside the gear set.
Energy-saving advantages:
1,To reduce the bearing load, and improve the volumetric efficincy;
2,In the case of partial load operation, it can improve efficiency and become energy saving to a better extent.
3,The energy saving of two-stage screw air compressor is up to 15%-25% than that of the one-stage air compressor, which can save the considerable electricity fees every year.

About shipping

Company information

Why choose us?

FAQ:

1.Q:What do you need machine and quotation?

A: According to capacity and factory size ,we can give you details.

2.Q: Are you trading company or manufacturer ?

A:We are factory.

3.Q:How do we pack machine?

A:Exporting wooden cases

4.Q:Lead time

A:Around 25-30 days after the receipt of your deposit.

Type:	High Pressure Gun
Usage:	Paint Spray Gun, Washing Gun, Hopper Gun, Garden Gun
Working Style:	Rotary Type
Air Wrench Type:	Pulse pneumatic wrench
Pneumatic Drill Range:	Tunnel
Degree of Automation:	Automatic

Customization:	Available \|

air-compressor

Choosing the Right Air Compressor For Your Home

You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only one motor, they are lightweight, compact, and easy to handle. Using one air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.

Positive displacement

A positive displacement compressor applies pressure to a fluid, whereas a centrifugal one does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.

Oil-free

Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has one of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, four times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing one for your industrial applications.

Single-stage

A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has one cylinder and two valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery one controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, one piston, and one air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage one is suitable for larger-scale arsenals.
air-compressor

CFM

The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting two output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.

PSI

The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure twenty to forty PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least forty to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as fifty percent on and twenty-five percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by one percent.
air-compressor

Power source

The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately four amps of power. A one-horsepower compressor would draw about twelve amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with three electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.

China factory Compressor Air Compressor Direct Compressor Air CZPT wholesaler
editor by CX 2023-06-08

China factory CZPT 50HP Germany Quality Heavy Duty Gas Air Compressor for Packing with Great quality

Product Description

Product Features
1. Using ATLAS-COPCO high efficiency air-end, more energy saving
2. IE4 high efficiency, IP66/ IP54 oil cooled PM motor
3. One shaft design, no belt, no gear, no coupling, 100% energy transmission
4. Lip seal leak-proof design to prevent leakage
5. Top brand inverter, more stable
6. Intelligent controller, CZPT group design, special for compressor
7. High efficiency cooling system, the maximum ambient T can up to 46° C. The cooler and fan are separated, easy to clean
8. Big case, big space, convenience to maintenance
9. Low noise and low vibration

Model	Max Working Pressure		F.A.D	Motor Power		Connection	Net Weight	*Dimension(LWH)*
–	Bar	Psig	m³/min	Hp	Kw	–	Kgs	Mm
LSH7.5-7	7	102	0.19~1.15	10	7.5	G3/4″	205	8507501000
LSH7.5-8	8	116	0.19~1.08
LSH7.5-10	10	145	0.19~0.94
LSH11-7	7	102	0.27~1.72	15	11	G3/4″	205	8507501000
LSH11-8	8	116	0.27~1.60
LSH11-10	10	145	0.27~1.42
LSH15-7	7	102	0.5~2.07	20	15	G3/4″	205	8507501000
LSH15-8	8	116	0.5~1.95
LSH15-10	10	145	0.5~1.77
LSH18.5-7	7	102	0.6~3.24	25	18.5	G1″	280	9508501080
LSH18.5-8	8	116	0.6~3.18
LSH18.5-10	10	145	0.6~2.76
LSH22-7	7	102	0.7~3.66	30	22	G1″	290	9508501080
LSH22-8	8	116	0.7~3.54
LSH22-10	10	145	0.7~3.18
LSH30-7	7	102	1.4~5.28	40	30	G1 1/2″	362	11309501200
LSH30-8	8	116	1.4~5.0
LSH30-10	10	145	1.4~4.5
LSH37-7	7	102	1.9~6.41	50	37	G1 1/2″	385	11309501200
LSH37-8	8	116	1.9~6.0
LSH37-10	10	145	1.8~5.46
LSH45-7	7	102	1.8~8.5	60	45	G1 1/2″	750	17239801600
LSH45-8	8	116	1.7~8.0
LSH45-10	10	145	1.7~7.3
LSH55-7	7	102	1.8~11.0	75	55	G2″	920	192010601600
LSH55-8	8	116	1.8~10.5
LSH55-10	10	145	1.8~9.4
LSH75-7	7	102	2.7~13.1	100	75	G2″	980	192010601600
LSH75-8	8	116	2.6~12.6
LSH75-10	10	145	2.6~10.9
LSH110+-7	7	102	5.1~20.3	150	110	G2″	2070	245512001600
LSH110+-8	8	116	2.6~12.6
LSH110+-10	10	145	2.6~10.9
LSH110+-13	13	188	2.6~10.9
LSH132+-7	7	102	6.0~24.1	180	132	G2″	2330	245512001600
LSH132+-8	8	116	5.7~22.8
LSH132+-10	10	145	5.2~20.6
LSH132+-13	13	188	4.6~18.3

FAQ

Q1: Are you a manufacturer or trading company?
A1: Xihu (West Lake) Dis.in is professional screw air compressor factory located in HangZhou, China, CZPT is Xihu (West Lake) Dis.in overseas market sales representative.

Q2: Xihu (West Lake) Dis.in is real member of Atlas-copco group?
A2: Yes, in 2571, Sweden Atlas-copco 100% acquired Xihu (West Lake) Dis.in.
Pls visit Atlas-copco’s official website for more information.

Q3: Xihu (West Lake) Dis.in air-end from Atlas-copco?
A3: Yes, Xihu (West Lake) Dis.in LS/LSV, LOH, LSH and CS series air compressors all use Atlas Copco’s air-end.

Q4: What’s your delivery time?
A4: about 10-20days after you confirm the order, other voltage pls contact with us.

Q5: How long is your air compressor warranty?
A5: One year for the whole machine since leave our factory.

Q6: What’s the payment term?
A6:We accept T/T, LC at sight, Paypal etc.
Also we accept USD, RMB, JPY, EUR, HKD, GBP, CHF, KRW.

Q7: What’s the Min. Order requirement?
A7: 1unit

Q8: What service you can support?
A8: We offer after-sales service, custom service, production view service and one-stop service.

Lubrication Style:	Oil Cooled
Cooling System:	Air-Cooled
Motor:	IP66
Free Air Delievery:	1.8-5.46m3/Min@10bar
Drive Mode:	Variable Speed Drive
Power:	37kw(50HP)

Samples:	US$ 9061/Unit 1 Unit(Min.Order) \| Request Sample

Customization:	Available \|

air-compressor

Choose an Air Compressor for Your Business

There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.

Positive displacement

Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are two different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
air-compressor

Single-stage

The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only one cylinder, which means one stroke is required to move air from one cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the one with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have one air intake, and two-stage air compressors have two air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
air-compressor

low noise

Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The two water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers two models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and two universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
China factory CZPT 50HP Germany Quality Heavy Duty Gas Air Compressor for Packing with Great quality
editor by CX 2023-06-07

China factory Screw Air Compressor CE Certificate R407c Refrigerant Evaporative Air Cooler supplier

Product Description

Refrigerated Compressed Air Dryer (Built-In Pre-Cooler)

Detailed Photos

Principle of working :
The amount of water vapor in the air compression by compressed air temperature determined: in case of compressed air pressure is basically the same, reduce the temperature of the air compressed compression to reduce the amount of water vapor in the air, and the excess water vapor will condense into liquid.
Freezing dryer is according to the corresponding relationship between the saturation water vapor pressure and temperature, use refrigeration device makes the compressed air is cooled to a certain dew point temperature, precipitation containing water, through the steam water separator and electric drainage device will discharge water, so that the compressed air can be dry.

Product Parameters

Model	Air Capacity (Nm3/min)	Voltage (V)	Fan Power (W)	Air connector dia	Net weight (Kg)	Lenghth (mm)	Wideth (mm)	Height (mm)	Air flow (Nm3/n)
SDLF-0.5HT	0.65	220	80	G1″	54	400	560	730	820
SDLF-1HT	1.2	220	80	G1″	57	400	560	730	820
SDLF-2HT	2.5	220	100	G1″	66	520	640	890	1640
SDLF-3HT	3.6	220	135	G1″	79	520	640	890	2670
SDLF-4.5HT	5.0	220	250	G1-1/2″	86	540	700	1000	4650
SDLF-6HT	6.8	220	250	G1-1/2″	90	540	700	1000	4650
SDLF-8HT	8.5	220	270	G2″	99	610	900	1070	5700
SDLF-10HT	10.9	380/220	260	G2″	113	610	900	1070	5700
SDLF-12HT	12.8	380/200	260	G2″	113	610	900	1070	5700

Note: The above models use plate/plate-fin heat exchangers.

Company Profile

Certifications

Packaging & Shipping

FAQ

After-sales Service:	Ok
Warranty:	1 Year
Flow:	Cross Flow
Material Status:	Bulk
Drying Medium:	Air
Structure:	All Kinds

Samples:	US$ 400/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

air-compressor

Choosing an Air Compressor

Considering a new Air Compressor? Here are some tips to make the decision easier. Learn the pros and cons of each type, including the differences between oil-injected and oil-free models, single stage and positive displacement. In addition, learn more about the different technologies that are available for your air compressor. It is important to choose an appropriate unit for the type of work you do. Here are some of the best compressors available today.

Positive displacement

There are several different types of air compressors, but most are positive displacement air compressors. They use a rotary or reciprocating component to compress air. The reciprocating component compresses air by reducing the volume of the chamber. Positive displacement compressors are used in bicycle pumps, chemical plants, and refrigerators. Positive displacement air compressors use multiple inlet ports. Despite the various types, the principle of operation remains the same.
Another type of positive displacement air compressor is a reciprocating piston. The piston inside a cylinder moves up and down, causing the compressed air to fill the upper part of the cylinder. These air compressors are used in a variety of different applications, including blowing bottles and gas pipelines. These air compressors can be water-cooled, lubricated, or non-lubricated. Different types have different capacities and air pressures.
A positive displacement flowmeter uses a rotating chamber that divides continuous fluid into discrete portions. The number of times the chamber is filled and discharged can be used to estimate the flow rate. The rotation speed of the measuring chamber is directly proportional to the flow rate. The drawbacks of this type of positive displacement flowmeter are that it is prone to jamming. If the fluid contains particles, it may be too thick for the meter to determine flow rate.
A negative displacement air compressor was invented in 1860 and is the oldest type of compressor. It uses two lobes positioned in a circular cavity. One rotor is connected to an engine, while the other pushes the other one to spin in the opposite direction. Negative displacement compressors are low-maintenance, but they do require more precision. They are often used in nuclear power plants because they use the kinetic energy of the rotating elements to produce pressure.

Oil-injected

Oil-flooded or oil-injected air compressors use liquid to seal and lubricate moving parts and reduce noise. Oil-flooded air compressors are effective for a variety of pneumatic tools and accessories. Some models have a thermostat that controls the amount of oil used during operation. Other types of oil-flooded air compressors are piston-type models. Here is an overview of the basic differences between these two air compressors.
An oil-injected air compressor is more expensive than a comparable oil-free air compressor, but its advantages far outweigh its disadvantages. An oil-free compressor is quieter, requires less maintenance, and has a lower price tag. It also offers a greater degree of air purity. A number of other advantages may also make this type of air compressor the better choice for many industrial settings. If you need a high-pressure compressor in a tight space, consider the benefits of an oil-free system.
Oil-injected air compressors require more maintenance than oil-free models. Both types of air compressors offer similar capacity and ISO 8573-1 Class 0 and 1-2 purity, but the oil-injected systems require more air-treatment components. They require an activated carbon filter and coalescing filter. Oil-injected air compressors will likely remain the standard for industrial air compressors for many years. And since their performance and efficiency are comparable, it may be worthwhile to invest in some point-of-use air treatment.
Both types of air compressors have their benefits. However, choosing between oil-free and oil-injected air compressors is not as straightforward as you might think. Whichever type you choose, make sure it will meet your needs. The benefits of an oil-injected air compressor outweigh their disadvantages. In general, oil-injected air compressors are more durable and can last longer than oil-free models. The only downside is their higher price.
air-compressor

Oil-free

When choosing an air compressor for your company, you’ll need to determine what it is going to be used for. For example, if you’re planning on using it to power multiple workers, you should consider getting an oil-free compressor. An oil-free compressor, on the other hand, is quieter and can power several workers at a time. If you’re a contractor, the most important consideration will be the type of jobs you’ll be doing. Higher air pressure means greater demand for air flow, and more pressure can damage the equipment.
Oil-free compressed air is certified 100% free of contaminants. Technically, oil-free air is not completely free of foreign matter, but it is extremely low within the limits of practical air quality. A technically oil-free air compressor might have a total oil level of 0.003 mg/m3. If you’re in need of a technically oil-free air compressor, you must install an air treatment equipment after your current compressor.
If you’re in the manufacturing industry, a good oil-free air compressor will save you money and reduce your environmental impact. Many of these tools require air compressors to work, and this equipment will ensure that they don’t get contaminated. To buy the best oil-free compressor, you should learn a bit about the different terms used by compressor repair companies. ACFM, for example, is the amount of air that can be compressed in one minute at rated conditions.
When you’re using an oil-free air compressor, you should know that the overall life of the device will be much shorter. Compared to an oil-flooded rotary screw air compressor, an oil-free compressor typically has a lifespan of 50 thousand hours. But it’s important to understand that this type of compressor can still cause damage to piping and processes. Therefore, you should choose an oil-free compressor when you need to clean air for your business.

Single-stage

A single-stage air compressor, also known as a piston air compressor, compresses air only once before storing it in a cylinder. This stored air has enough energy to power a variety of pneumatic tools, such as screwdrivers, chisels, and wrenches. These units are also ideally suited for low-flow applications and are widely used in gas stations, auto shops, and various manufacturing plants.
A single-stage air compressor uses two valves – one for inlet and one for outlet – to transfer compressed air. Both valves are actuated by springs. The inlet valve has a slight curvature to provide protection from damage. The compressor’s outlet valve opens when the pressure in the cylinder is higher than the pressure in the storage tank. The piston moves very quickly inside the cylinder, exerting a high amount of force throughout the compression process. This high piston speed is a common cause of compressor wear and tear.
A single-stage air compressor is ideal for smaller tradesmen and small construction crews. Its lightweight and compact design make it easier to transport and store. While it may be tempting to buy the first cheap air compressor you see, it’s important to balance the price against performance to choose the right air compressor for your needs. The best single-stage air compressor is one that provides excellent performance and durability. Its two-stage counterpart is designed for larger construction teams and large applications.
The main difference between a single-stage and a two-stage air compressor lies in their capacity. A single-stage air compressor compresses air only once and delivers it into the storage tank, while a two-stage compressor compresses it twice, creating double the pressure. Because of this, single-stage air compressors are cheaper and versatile than their counterparts, which means that they can be used for multiple purposes.
air-compressor

Low-noise

A low-noise air compressor is a type of industrial compressor that is less noisy than regular air compressors. These are generally smaller machines designed for smaller factories and workshops with a few to several employees. They are designed to handle mid-weight volumes of compressed air per day. This type of compressor is especially useful for smaller manufacturing businesses that need to produce compressed air for medical applications. Small breweries can also benefit from the low-noise capabilities of these compressors.
Low-noise air compressors come in various sizes and features. For smaller jobs, you can purchase a one-gallon model that is lightweight and portable. For larger jobs, you can purchase one with a larger tank that can provide more pressure for longer jobs. However, a larger tank will make the compressor heavier and harder to transport. To avoid this, make sure to check the size of the tank and how much power it can handle.
Considering a low-noise air compressor for your business? If so, you’ve come to the right place. There are a variety of affordable and dependable low-noise options to choose from. A CAT 10020C, for example, is designed to provide high-volume air to many outlets at once. A CAT 10020C comes with a 10-gallon tank, wheels, and a carrying handle.
Noise levels can also affect the productivity of employees. When employees work with air compressors in close proximity to each other, they may develop tinnitus. If employees are free from tinnitus because of the loud noise, they are likely to work more efficiently. Moreover, it will be easier for them to focus and communicate efficiently. If you need a compressor, a low-noise one is an excellent choice.

China factory Screw Air Compressor CE Certificate R407c Refrigerant Evaporative Air Cooler supplier
editor by CX 2023-06-07

China wholesaler CZPT CZPT Automobile CZPT Delong Truck Spare Parts Air Condition Compressor Dz13241845034 small air compressor

Product Description

Fortius ZheJiang automobile CZPT Delong truck spare parts air condition compressor DZ13241845034

Part name	Fortius ZheJiang automobile CZPT Delong truck spare parts air condition compressor DZ13241845034
Part number	DZ13241845034
Application	Sinotruk

Detailed Photos

Company Profile

Other products

After Sales Service

1. Near 20 years Wholesaler experience in truck field

2. Specialization: Accurately meet your requirement, Experienced engineers serving for you

3. Good quality: Original products & OEM services, with many Certifications.

4. Great variety and wide range: your “One-shop purchasing service”

5. Warehouses, More than 10000 square CZPT

6. Important partner with CZPT & CZPT and know the market very well

7. Provide All Kinds of Spare Parts In The Future.Direct price from the manufacturer,with guaranteed quality and low price.

FAQ

Q1,Are you a factory or trading company?
A: We are a factory integrating research, development, production and sales.

Q2,What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balance.

Q3,How about your delivery time?
A: Generally, it will take 7 to 10 days after receiving your advance payment. The specific delivery time depends on the items and
the quantity of your order.

Q4,How can I get the new price of a product?
A:Please provide the exact or approximate quantity, packing details, destination port or special requirements, so we could give
you the price accordingly.

Q5, How do you make a price offer and how long is its validity?
A:We usually quote within 24 hours by email after we get your inquiry .If you are very urgent to get the price,please call us or
tell us in your email so that we will regard your inquiry priority. The price valid with 30 days.

Q6,Do you accept small order or Sample order?
A:Yes, we do. If you need the samples, we can send free sample to you, you only need to pay for the freight when it arrive(
Freight collect ).

Q7,Do you accept third party inspection?
A:Yes, we do.

Q8,Do you test all your goods before delivery?
A:Yes, we have 100% test before delivery

Q9, How do you make our business long-term and good relationship?
A: 1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter.

After-sales Service:	12 Months
Warranty:	12 Months
Type:	Electrical System
Certification:	ISO9001
Driving System Parts:	No
Electrical System Parts:	Compressor

Customization:	Available \|

air-compressor

A Buyer’s Guide to Air Compressor Types

There are many types of Air Compressors, and it’s important to understand what each type has to offer. In this article, we’ll discuss single stage air compressors, low-noise compressors, and models with two pistons. But, before you buy an Air Compressor, be sure to read our buyer’s guide to the various types. This way, you’ll have all of the information you need to make the right decision for your business.

Single-stage air compressors

A single-stage air compressor is an excellent choice for most general-purpose purposes. They provide enough power to operate pneumatic tools, and they produce less heat. Single-stage air compressors, however, are not suitable for heavy-duty industrial uses. However, they can be used in various applications, including auto shops, gas stations, and various manufacturing facilities. They are also suitable for borewells and other high-pressure places.
These air compressors are a great choice for home use and are suitable for small-scale businesses, contractors, and small shops. These compressors have continuous duty cycles, cast iron compressor pumps, and a minimum 5,000-hour pump life. They also feature advanced features, including ODP motors, Auto Start & Controls, Receiver tanks, and power cords. They have low maintenance and can save you a great deal of money.
Single-stage air compressors are generally less expensive and lighter than their two-stage counterparts. Single-stage air compressors are also more portable, which is a plus for small projects. While two-stage compressors offer higher CFM, they are more powerful and bulky, making them unsuitable for small or home use. So it is essential to determine what you will use the air compressor for and decide on a model based on your needs.
A single-stage air compressor is made of a piston and a tank. The piston moves rapidly inside the cylinder and exerts pressure on the cylinder. This means that the piston can’t move any faster than the air pressure outside the cylinder. The piston is designed to operate in the same way for each stage. This is a great choice for home shops and one-man automotive shops, as it allows you to control the pressure without sacrificing the pump’s life.
Single-stage air compressors are often cheaper than two-stage versions, but they are not the best choice for every application. If you are only using your air compressor occasionally, you’ll find a one-stage model to be much more reliable than a two-stage model. The main difference between the two types of compressors is in the amount of air that each stage compresses. A two-stage air compressor will have more air storage capacity, but it will still produce more pressure.

Rotary vane compressors

Rotary vane compressors use a centrifugal pump to compress air. The rotor is set eccentrically in the housing, which almost touches the vane. As the rotor turns, the air that enters the pump is trapped between the vanes. This compressed air undergoes compression as the rotor rotates. Vanes are small pieces of carbon fiber or graphite composite. Vanes may be made of different materials depending on the application.
While rotary vane pumps are not commonly used to produce compressed air, they are widely used in automotive and hydraulic applications. Chances are, you have used a rotary vane pump at some point in your life. These pumps are also common in the vacuum and compressed air industries. As a result, many people don’t realize that they’re still around. They feature slots that allow the vanes to slide in and out of the rotor.
A rotary vane compressor has a drum and rotor inside. The rotor is eccentrically positioned and has slots and grooves on its surface. Its inlet and outlet ports are situated off-center, allowing the vanes to be pushed out by centrifugal force. Because the rotor rotates so quickly, air is trapped between the vanes. This air then becomes pressurized by the rotating rotor.
Rotating vane compressors can be easily serviced and repaired. A simple replacement of carbon vanes requires just 15 minutes and common tools. The carbon vanes typically last nine to eighteen months, depending on system operating pressure. Before purchasing a rotary vane compressor, make sure to check whether it has been properly performance-tested and has a warranty. Generally, warranties cover the rotor/stator chambers but do not cover the vanes or air filters. You should also check if the unit is covered by a lightning or water damage warranty.
Rotary vane compressors are an integral part of manufacturing industries. Many pharmaceutical manufacturing facilities depend on rotary vane compressors to control their equipment. Other industries that use rotary vane compressors include the plastics, woodworking, natural gas, and medical & dental fields. Their benefits are numerous and far outweigh any disadvantages of rotary screw compressors. For example, a rotary vane compressor can double the life of a conventional compressor.
air-compressor

Rotary vane compressors with low-noise models

If you are looking for a rotary vane air compressor, you have come to the right place. CZPT’s LV Series rotary vane compressors offer low-noise models, compact size, and robust integration. In addition to their low-noise features, they feature large filter systems to deliver high-quality compressed air. The LV Series models also feature CZPT’s reputation for reliability and quality.
This type of compressor uses centrifugal force to operate and is limited in its top and minimum operating speeds. They are only a third as powerful as screw compressors, and their top speed limits are much lower. Furthermore, the vanes wear out easily at high speeds because there is not enough centrifugal force to seal them against the cylinder’s edges. Even at half their full capacity, they consume as much as 80% of their total energy rating.
Because piston compressors produce a lot of noise, factory owners and shop owners have begun to install noise-dampening cabinets and other solutions. But, rotary vane compressors produce far less noise than a traditional vacuum, and the maintenance costs are also low. Rotary vane compressors are also extremely helpful in several industries. They are used in the automotive and auto finishing industries, as well as in dairy industries and milking machines.
If you have a deep pond, a rotary vane air compressor kit can pump up to 20 feet of water. This is more than enough airflow for two to five diffusers. A 1/4 HP rotary vane kit pumps around 4.2 CFM. It also helps to increase circulation and oxygen levels in the pond. Finally, a 1/4 HP kit offers the necessary power to clean up the bottom of a pond.
The rotary vane and rotary screw are the most popular air compressors today. While they are similar in many ways, they are more versatile and durable than their counterparts. They use fewer angular contact ball bearings and require less frequent maintenance than piston air compressors. Compared to piston air compressors, rotary vane and rotary screw compressors are quieter and are less expensive.
air-compressor

Rotary vane compressors with two pistons

The rotary vane and rotary screw compressors are similar in application, but both have different advantages and disadvantages. This article will compare the benefits of each and highlight the differences between them. While both are commonly used in industrial applications, rotary vane compressors are preferred by many industries. These compressors also have a wide range of uses, ranging from automotive air tool operation to milking machines. These compressors also have the advantage of being quieter than piston-powered ones.
The current common rail position may not be suitable for pressure swirl injectors, but new positions have been tested and show improvements in specific energy values. Moreover, the current position is not required for external oil pumps. However, mass induction and expulsion have to be performed with utmost care. This article focuses on the design and efficiency of rotary vane compressors. You can find more information about this new design in the references mentioned below.
The advantages of this type of compressor are its low cost, compact size, and easy maintenance. Hence, they are preferred in low capacity applications. Moreover, they feature integrated vanes. The rotating vanes close the air gap and compress air towards the outlet. Compared to piston-powered compressors, these units are cheaper and more reliable. Therefore, you should choose one with the lowest price tag. You can also opt for rotary vane compressors that are oil-free.
Sliding vane compressors are another popular variant. They have a single cylinder connected to the compressor and are capable of operating at low speeds. This design also reduces the amount of friction and maintains volumetric efficiency. However, the sliding vane compressors suffer from high frictional losses. If you are looking for a more efficient rotary compressor, this is the best option. While sliding vane compressors have been in the spotlight for over a century, they are still quite young.
These compressors are easy to install and maintain. They are also quieter than piston compressors. They are also cheaper than piston-driven compressors. The energy efficiency and low price make them the perfect choice for any commercial or industrial application. If you’re looking for a small, compact compressor, the rotary vane has been proven to be the best choice for your needs. You should know that it has a long service life.

China wholesaler CZPT CZPT Automobile CZPT Delong Truck Spare Parts Air Condition Compressor Dz13241845034 small air compressor
editor by CX 2023-06-06

China Hot selling 15kw 20HP 7bar to 13bar Industrial Silent Stationary Rotary Screw Air Compressor Parts with Electric Fixed Speed IP54 Motor and High-Performance Air End air compressor CZPT freight

Product Description

Power Frequency Direct drive screw air compressor
♦ Intelligent Touch-Screen Design
♦ Direct Driver
♦ Oil Gas Separator
♦ Oil Filter
♦ Air Filter
♦ Stainless Steel
♦ Piping Design

Advantages

1. Remain more than 96% efficiency under any load, Save energy 38% more than ordinary motor.
2. Use coaxial integration structure design, No need to use transmission components such as belt, gear and shaft coupling, No transmission loss completely,Transmission efficiency reaches 1 high strength impact resistance tests to ensure stability and durability.

Control Panel

Real-time observation of the compressor operation status:Host, fans, exhaust gas temperature, exhaust pressure,power output, total electricityconsumption, fault messages, 24-hour customer service line.
Multifunction Design: Data curve, parameter settings,device information, data query.

Air Filter

High-quality filte,filter the dirts in the air reliably,dust particles can be controlled below 0.3 micron,filtering accuracy up to 99.99%.

Model	Pressure (mpa)	Displacement (m³/min)	Power (kw)	Dimension (mm)	Weight (kg)	Outlet Size
FSS-0.7/7.5	0.7	1.20	7.5	815700855	450	G3/4″
FSS-0.8/7.5	0.8	1.10
FSS-1.0/7.5	1.0	0.95
FSS-1.3/7.5	1.3	0.80
FSS-0.7/11	0.7	1.70	11	10007501120	500	G1″
FSS-0.8/11	0.8	1.60
FSS-1.0/11	1.0	1.40
FSS-1.3/11	1.3	1.20
FSS-0.7/15	0.7	2.40	15	8009501100	560	G1″
FSS-0.8/15	0.8	2.20
FSS-1.0/15	1.0	2.00
FSS-1.3/15	1.3	1.70
FSS-0.7/18.5	0.7	3.10	18.5	90011501260	580	Rp1-1/4″
FSS-0.8/18.5	0.8	2.90
FSS-1.0/18.5	1.0	2.70
FSS-1.3/18.5	1.3	2.20
FSS-0.7/22	0.7	3.80	22	10148001200	620	Rp1 1/4″
FSS-0.8/22	0.8	3.50
FSS-1.0/22	1.0	3.20
FSS-1.3/22	1.3	2.90
FSS-0.7/30	0.7	5.20	30	90011501260	980	Rp1 1/4″
FSS-0.8/30	0.8	5.00
FSS-1.0/30	1.0	4.30
FSS-1.3/30	1.3	3.70
FSS-0.7/37	0.7	6.40	37	15509801360	1571	Rp1 1/2″
FSS-0.8/37	0.8	6.10
FSS-1.0/37	1.0	5.70
FSS-1.3/37	1.3	5.00
FSS-0.7/45	0.7	8.00	45	168010501395	1085	Rp1 1/2″
FSS-0.8/45	0.8	7.70
FSS-1.0/45	1.0	7.00
FSS-1.3/45	1.3	5.80
FSS-0.7/55	0.7	10.50	55	180012501600	2200	Rp2″
FSS-0.8/55	0.8	9.80
FSS-1.0/55	1.0	8.70
FSS-1.3/55	1.3	7.60
FSS-0.7/75	0.7	13.60	75	257112501650	2300	Rp2″
FSS-0.8/75	0.8	13.30
FSS-1.0/75	1.0	11.60
FSS-1.3/75	1.3	9.80
FSS-0.7/90	0.7	16.30	90	257112501650	2800	Rp2″
FSS-0.8/90	0.8	16.00
FSS-1.0/90	1.0	14.60
FSS-1.3/90	1.3	12.30
FSS-0.7/110	0.7	20.30	110	250016001800	4000	DN65
FSS-0.8/110	0.8	19.40
FSS-1.0/110	1.0	17.30
FSS-1.3/110	1.3	14.60
FSS-0.7/132	0.7	24.00	132	250016001800	4500	DN65
FSS-0.8/132	0.8	23.00
FSS-1.0/132	1.0	20.00
FSS-1.3/132	1.3	18.00
FSS-0.7/160	0.7	28.00	160	250016001800	4800	DN65
FSS-0.8/160	0.8	26.50
FSS-1.0/160	1.0	22.50
FSS-1.3/160	1.3	20.10
FSS-0.7/185	0.7	32.50	185	277020502200	5200	DN65
FSS-0.8/185	0.8	31.00
FSS-1.0/185	1.0	28.00
FSS-1.3/185	1.3	25.10
FSS-0.7/200	0.7	35.00	200	285018501950	5800	DN80
FSS-0.8/200	0.8	34.00
FSS-1.0/200	1.0	32.00
FSS-1.3/200	1.3	26.50
FSS-0.7/220	0.7	40.00	220	285018501950	5900	DN80
FSS-0.8/220	0.8	36.80
FSS-1.0/220	1.0	32.20
FSS-1.3/220	1.3	28.50
FSS-0.7/250	0.7	43.50	250	285018501950	6600	DN100
FSS-0.8/250	0.8	42.00
FSS-1.0/250	1.0	38.10
FSS-1.3/250	1.3	34.60
FSS-0.7/315	0.7	50.80	315	557122102130	8000	DN125
FSS-0.8/315	0.8	48.20
FSS-1.0/315	1.0	42.60
FSS-1.3/315	1.3	39.80
FSS-0.7/355	0.7	60.00	355	520025002130	8500	DN125
FSS-0.8/355	0.8	57.00
FSS-1.0/355	1.0	50.00
FSS-1.3/355	1.3	45.00

ZheJiang CZPT Gas Compressor Manufacturing Co.,Ltd. founded in 2005, is a leading high technology of machine and equipment manufacturer integrating the design, R&D, production, sales and service for air compressors & Mining Equipment. Adopting advanced technology, design concept and quality control, and we are able to provide customized products to meet customers’ OEM needs.
Our company has more than 520 employees, including 86 senior technicians and professional engineers. Our technical team provides our customers with professional air system solutions. With the total 15000 square meters of the facility, 4 modern advanced production lines are built up to ensure production capacity to meet customer requirements.
Our company has been awarded the honorary title of “ZheJiang high-tech enterprise” and our products enjoy high honors in the industry. Our company has the ISO9001 certification and was awarded the qualification certificate of equipment through military contracts in 2018.
We offer the following products and services:
1. Screw air compressor
    1.1 Oil-free screw air compressor
    1.2 Oil-injected air compressor
2. Reciprocating piston air compressor
    2.1 Piston air compressor
    2.2 Oil-free piston air compressor
    2.3 Piston medium & high-pressure air compressor
3.Portable air compressor & Mining Equipment
    3.1 Diesel or Electric portable screw air compressor
    3.2 Air Pick, Rock Drill, DTH Drilling Rig, Crawler Drilling Rig
4. Air compressor accessories
    4.1 CZPT or Adsorption compressed air drier
    4.2 Compressed air filter or tank
4.3 Lubrication oil
We have a complete system of after-sales service and quality assurance. The company’s material purchase, inspection, manufacturing, installation, and testing are strictly in accordance with the ISO procedures. which will ensure each compressor has reliable quality and has a complete record to trace, if needed.
Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.

Q: How can we start order with your factory?
A: First, leave us an inquiry and advise which item you’re interested, and then we will contact you in 24 hours. You’re so kind if provide all detailed information, will better for us to know exactly what you need.

Q: What are your MOQ?
A: Different products have different MOQ, most is 1 set.

Q: What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages.

Q: How about your delivery time?
A: Generally, it will take 90 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q: Do you a trade company or real factory?
A: We are 100% factory; we located in ZheJiang city, China.

Shipping Cost: Estimated freight per unit.	To be negotiated

After-sales Service:	Online Support
Warranty:	1 Years
Lubrication Style:	Lubricated

Samples:	US$ 1138/Piece 1 Piece(Min.Order) \| Order Sample

Customization:	Available \|

air-compressor

The Air Compressor Is a Versatile Tool

The Air Compressor is one of the most versatile tools in any garage or workshop. It is easy to use and can perform a variety of tasks, from jackhammering to drilling. These machines are available in a wide variety of sizes and types, making it an excellent choice for a variety of situations. With a single motor, you no longer need separate motors for each tool. Its lightweight, compact design makes it easy to handle, and the single motor also reduces wear on parts.

Oil-injected

Oil-injected air compressors require a large amount of lubricant, which needs to be added to the sump regularly to maintain optimum performance. As there are many types of industrial fluids, a well-intentioned maintenance technician may add the wrong lubricant to the compressor. If this happens, the compressor will become incompatible with the lubricant, resulting in excessive carryover and the need to flush and replace downstream air treatment components.
Typically, the G 110-250 oil-injected rotary screw compressor from Atlas Copco provides reliable compressed air, preventing costly downtime. The G110-250 oil-injected rotary screw compressor is highly reliable and durable, enabling it to function in temperatures up to 46degC/115degF. Despite the oil-injected air compressor’s robust design, this unit requires very little on-site installation, and it features simple operation.
The primary advantage of oil-injected air compressors is the reduced cost of running. The cost of oil-free compressors is less than half of that of oil-injected ones, and it will require fewer maintenance costs in the long run. Moreover, the oil-free system is more environmentally friendly than oil-injected air compressors. But the drawbacks of oil-injected air compressors are substantial, too. It can contaminate finished goods and cause a significant financial risk for the manufacturer.
An oil-injected rotary screw air compressor offers several advantages over its counterpart. First, it features an innovative vertical design with variable-speed drive, allowing it to run more efficiently. Second, oil-injected air compressors reduce energy consumption by up to 50% compared to non-oil-injected air compressors. They also have a thermostatic valve, allowing them to maintain an optimum temperature. Thermostatically-regulated oil coolers allow the compressor to run more quietly.

Oil-free

What is an oil-free air compressor? The name refers to a type of air compressor that does not contain oil in the compressor chamber. Oil-free air compressors still use oil for various purposes, including lubricating the moving parts and managing waste heat. However, many people do not realize that their air compressor still requires oil for proper functioning. This article will explore why this type of air compressor is preferable for many users.
First of all, oil-free air technology has many benefits. For one, it reduces the energy cost involved in filtering air, and it minimizes leaks. Moreover, it also reduces the oil costs associated with compressor refills. And finally, it reduces the risks of contamination. Oil-free air technology is the future of compressed air. If you’re looking for an oil-free air compressor, here’s what to look for in your search.
Depending on the purpose of your air compressor, it may be beneficial to invest in an oil-free air compressor. Oil-lubricated air compressors are generally more durable than their oil-free counterparts, but they may cost twice as much. You should still consider the cost of ownership before purchasing an oil-free compressor. The oil-free models can be easier to transport, and they are more powerful. Moreover, they’re quieter than oil-lubed models.
An oil-free air compressor also means less maintenance, as it doesn’t need oil to work. This type of air compressors also features fewer moving parts, which means fewer places for problems to develop. All oil-free air compressors are manufactured to meet ISO Class 0 and 1 air purity standards. They also have less noise and vibration compared to their oil-based counterparts. So, why not choose an oil-free air compressor for your business?
air-compressor

Gasoline

When choosing a gas-powered air compressor, it’s important to consider the advantages of gasoline. This energy source can power a large air compressor without electricity. However, this type of air compressor lacks electrical hookup, so you’ll need to run an extension cord if you need to use it at a distance. However, gas compressors are able to function with just a gas tank. This makes them ideal for medium to heavy-duty industrial applications.
Another important consideration when choosing a gas air compressor is its size. Larger compressors are typically larger than portable ones and require more space. This makes them easier to transport and operate on the go. However, if you’re not sure which type of air compressor is best for you, consider the gas-powered versions. While they may be lighter, they don’t run as smoothly as their electric counterparts. Gasoline-powered compressors are not as portable as their electric counterparts and require proper maintenance.

Electricity

Electricity in an air compressor is not cheap. A 25 HP air compressor runs for ten hours each day, five days a week. The motor in these machines consumes 746 watts per hour. To find out how much electricity the equipment uses, multiply the wattage by the running time. For example, if the compressor runs for three hours, then it will use 1.9 kilowatt hours of electricity. To determine how much electricity an air compressor uses per day, you can calculate the kilowatt hours and multiply the number by the utility rate. Considering this, you can determine the cost of running your air compressor once per month.
The cost of operating an air compressor depends on the type of compressor. Electric air compressors are often silent and can run without any maintenance. These tools can be left unattended for up to four thousand hours before requiring repair. Electric air compressors require higher power for higher pressure, so you should plan accordingly. Whether or not you need a maintenance visit is up to you, but the benefit of not having to spend a fortune on repairs is priceless.
Although compressed air is not an energy-efficient source, its use in a variety of applications may save you money and kilowatts. Since an air compressor uses power when it is running, the cost is lower than the cost of operating a power tool. If you plan to use your air compressor for a long time, make sure that it is maintained properly. Proper care will save you money and power, and you may even be able to get an extended warranty if the compressor breaks down.
air-compressor

Variable frequency drive

The main purpose of a variable frequency drive (VFD) in an air compressor is to reduce energy consumption in the process of compression. A single motor drag system cannot adjust its speed continuously according to the weight of the load. By applying frequency control to the compressor, the power consumption can be reduced while maintaining the same pressure level. Therefore, a VFD is an excellent choice for compressors. Its benefits are numerous.
A VFD can also monitor the temperature of the motor and send error signals if the motor is running too hot or too cold. This eliminates the need for a separate sensor to monitor the oil pressure. These functions are useful not only in lowering energy consumption, but also in improving the performance of an application. Moreover, a VFD can monitor additional variables such as temperature and motor speed. Hence, it is a useful investment.
When using a VFD, it is crucial to choose the right motor. The speed of the compressor should be within the maximum starting limit of the motor. The air tank may be of any size, but a constant pressure limit is required to keep the VFD running within the service factor of the motor. In addition to a VFD, a master controller should also include a remote pressure set point and a PID card for a master controller. The transmitter should incorporate all useful data from the VFD, including the speed and the oil temperature. The VFD must be tested before it is integrated with the master control. It should be tested for min and max speed, temperature, and current within the expected range.
The use of a VFD in an air compressor has many benefits. One of the most notable is the reduction in power consumption. Fixed-speed compressors run on set points of six to seven bar. An extra bar of compression uses 7 percent of energy. This energy is wasted. A VFD-powered air compressor can also increase the life span of compressor parts. It is one of the best investments in your compressor. So, why wait any longer?

China Hot selling 15kw 20HP 7bar to 13bar Industrial Silent Stationary Rotary Screw Air Compressor Parts with Electric Fixed Speed IP54 Motor and High-Performance Air End air compressor CZPT freight
editor by CX 2023-06-05

China Hot selling Low Pressure Fixed-Speed High Security Two-Stage Screw Air Compressor for Textile Industry supplier

Product Description

NO	Power (kW)	Pressure (MPa)	Volumetric flow (m³/min)	Exhaust outlet size GBT7306 (m) GBT9119(flange)	Weight (kg)	Size (L x W x H mm)
UDT75-5	75	0.5	20.00	DN80	3640	2600x1700x2090(A)
UDT90-5	90	0.5	22.50	DN80	3750 3550	3050x1850x2120(A) 2850x1850x2120(W)
UDT110-5	110	0.5	27.50	DN125	4150 4000	3200x2050x2120(A) 3000x1850x2120(W)
UDT132-5	132	0.5	32.50	DN125	4250 4050	3200x2050x2120(A) 3000x1850x2120(W)
UDT160-5	160	0.5	41.00	DN125	6000 5800	3850x2150x2150(A) 3400x2150x2250(W)
UDT200-5	200	0.5	50.00	DN150	7750 7450	4200x2150x2250(A) 3400x2510x2250(W)
UDT220-5	220	0.5	56.00	DN150	7850 7650	4200x2150x2250(A) 3400x2150x2250(W)
UDT250-5	250	0.5	59.00	DN150	8000 7800	4200x2150x2250(A) 3400x2150x2250(W)
UDT90-4.5	90	0.45	22.50	DN80	3750 3550	3050x1850x2120(A) 2850x1850x2250(W)
UDT110-4.5	110	0.45	27.00	DN125	4150 4000	3200x2050x2120(A) 3000x1850x2120(W)
UDT132-4.5	132	0.45	34.00	DN125	4150 4000	3200x2050x2120(A) 3000x1850x2120(W)
UDT185-4.5	180	0.45	50.00	DN125	7600 7250	4200x2150x2250(A) 3400x2150x2120(W)
UDT200-4.5	200	0.45	53.00	DN150	7600 7250	4200x2150x2250(A) 3400x2150x2250(W)
UDT220-4.5	220	0.45	59.00	DN150	7850 7450	4200x2150x2250(A) 3400x2150x2250(W)

FAQ
Q: How about our after-sales service?
A: Emails or calls for feedbacks in 2 months interval.

Q:What trade terms do we provide?
A: Trade term :CIF ,CFR ,FOB,Ex-Works .

Q: What kind of settlement currency do we offer?
A: We do any kind of currency such as US dollar, euro, RMB, etc.

Q: How long is the delivery time of our product?
A: Our standard delivery time is 30 days after confirmation order & receiving recipets for standard compressors, for the other non standard requirement will be discussed case by case.

Q: How to install our compressor?
A: Installation guidance and on-site commissioning provided by trained technicians or local authorised service crew.

Q: What’s the Min. Order requirement ?
A: Our Min. Order quantity is 1pc.

After-sales Service:	Standard Warranty
Warranty:	1 Year
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	None

Customization:	Available \|

air-compressor

Choosing an Air Compressor

Positive displacement

Oil-injected

Oil-free

Single-stage

Low-noise

China Hot selling Low Pressure Fixed-Speed High Security Two-Stage Screw Air Compressor for Textile Industry supplier
editor by CX 2023-06-02

China best Wholesale Medical Air Comperssor 40L for Dental and Silent Air Compressor air compressor price

Product Description

Wholesale Medical Air Comperssor 40L for Dental and Silent Air Compressor

Product Description

Features:
-Reliable and meet the requirements of the dental equipment manufacturer.
-More than 24 liters each pressure vessel has a supervisory inspection certificate.
-For dentists and dental technicians to provide a reliable source of green gas.
-To eliminate the risk of cross infection.
-Applicable to a wide variety of equipment, dental laboratory.
-Effective prevention of dental equipment wear and tear.

Specification:
Model : TY-2EW-40
POWER : 850W/1.1HP
AIR FLOW : 150 L/MIN
NOISE : 55db
MAX WORKING PRESSURE : 8 BAR
TNAK : VERTICAL 40 LITER
Net weight : 35 KG
package : strong box

Item No.	Voltage	Power		Air flow (L/min)	Noise (dB)	Air tank (L)	Max Pressure (bar)	Packing size (LxWxH)cm	Weight (KG)	Supply
		KW	HP
TY-2EW-40	110V/60Hz	0.85	1.1	150	55	40	8	44x44x73	35	2 chairs
	220V/50Hz

Advantage:
OIL FREE: Compare to lubrication compressor, one-step operation, do not need any lubricated oil, and harmless to the human body, more health and hygiene.
SUPER SILENT: Noise level lower than 60dB, ensure have friendly-enviromently treating room.
MULTI-PHASE FILTERATION: Advanced branded water filter to ensure extremely green and dry air.
EASY USING: One-step operation, when connecting with power, air compressor work automatic, also equipped with thermal prevention deviceto avoid over heating to protect motors.
GREEN AIR: Air tank have internal oxidation-proofed precess,avoaid corrosion and supply hygiene air to the equipments.
ENERGY SAVING: High quality pressure switch used to control the power of air compressor automatically stop when reach max pressure, and restart at mix pressure.
LOW VIBRATION: Robber foot reduce vibration and keep the air compressor away from wet place.
HIGH DURABILITY: long life air pump up to 3,000 hours working time.
SIMPLE OPERATION: No need to lubricate oil.

Applications:
Dental clinic, medical and health, SPA, Tattoo house, scientific research, electronic, chemical, Laboratory, spraying, Industrial, Printing etc.

Quick Details		TY-2EW-40
Applicable Industries:	Medical & Dental	Showroom Location:	None
Condition:	New	Type:	PISTON
Configuration:	PORTABLE	Power Source:	AC POWER
Lubrication Style:	Oil-free	Mute:	Yes
Power Source:	AC POWER	Brand Name:	Toye
Lubrication Style:	Oil-free	Dimension(LWH):	46X46X73CM
Place of Origin:	HangZhou ,China	Warranty:	2 Years
Voltage:	220V/110V	Air capacity:	150L/min
Weight:	35KGS	Video outgoing-inspection:	Provided
Working Pressure:	0.8 bar	Warranty of core components:	2 years
Machinery Test Report:	Provided	Gas Type:	Natural Gas
Marketing Type:	New products 2571	Usage:
Core Components:	Pressure vessel, Motor, Pump	VDC:	220V/110V
Product name:	Air compressor	Local Service Location:	NONE
Air delivery:	40L	Certification	CE,ISO13485
After Warranty Service:	Online and Offline services	Package	Carton/wooden box
After sales Service Provided:	Online and Offline services	Supply Ability	1000PCS/month

OIL FREE: Compare to lubrication compressor, one-step operation, do not need any lubricated oil, and harmless to the human body, more health and hygiene.

SUPER SILENT: Noise level lower than 60dB, ensure have friendly-enviromently treating room.

MULTI-PHASE FILTERATION: Advanced branded water filter to ensure extremely green and dry air.

EASY USING: One-step operation, when connecting with power, air compressor work automatic, also equipped with thermal prevention deviceto avoid over heating to protect motors.

GREEN AIR: Air tank have internal oxidation-proofed precess,avoaid corrosion and supply hygiene air to the equipments.

ENERGY SAVING: High quality pressure switch used to control the power of air compressor automatically stop when reach max pressure, and restart at mix pressure.

LOW VIBRATION: Robber foot reduce vibration and keep the air compressor away from wet place.

HIGH DURABILITY: long life air pump up to 3,000 hours working time.

SIMPLE OPERATION: No need to lubricate oil.

Applications:
Dental clinic, medical and health, SPA, Tattoo house, scientific research, electronic, chemical, Laboratory, spraying, Industrial, Printing etc.

More Design

Certifications

Company Profile

Exhibition

Production Workshop

Packaging & Shipping

Client Feedback

FAQ

1.Q:Are you a factory or trading company?

A:We are factory.we produce dental chair, dental intra oral camera and dental air compressor, and it’s approved CE certificated.

2.Q:Where is your factory located? How can I visit there?
A:Our factory is located in HangZhou City, ZheJiang Province, China, near HangZhou.You can fly to Xihu (West Lake) Dis. airport ,you can take tax or metro to HangZhou directly.All our clients, from home or abroad, are warmly welcome to visit us!

3.Q: How can I get Fob or C&F price?
A: Normally production time of products is from 2 week to 1 month depending on the quantity ordered. If you are sourcing a product, our representative will give you specific information regarding the lead time. If you need a rush order, contact our representatives to discuss your specific needs.

4.Q: How long is my warranty and what does it cover?
A:Detnal unit chair carry the full 1 year manufacturer warranty. Each warranty period begins at the date of delivery date and ends after 1 year.The warranty varies by option items and manufacturer All warranty claims will be void due to neglect, lack of maintenance, and/or improper handling.

5.How can I get the after sevice? How can I get the spare part after 1 year warranty?
A: We welcome your chats online (Chat or leave message: After service) or e-mail to us regarding any technical or related questions that you may have. And we will offer some free sparts for container order. We gurantee keep dental chair units spare parts offer.

If you want to know more information about our products welcome to contact us in any time, And welcome to our company!

Website: toyedent
Add: 5/F Zhisheng BLDG.,East Keji Rd.,Shishan Town,Xihu (West Lake) Dis. District, HangZhou

Performance:	Low Noise
Mute:	Mute
Lubrication Style:	Oil-less
Drive Mode:	Electric
Configuration:	Portable
Power Source:	AC Power

Customization:	Available \|

air-compressor

Choosing an Air Compressor

Positive displacement

Oil-injected

Oil-free

Single-stage

Low-noise

China best Wholesale Medical Air Comperssor 40L for Dental and Silent Air Compressor air compressor price
editor by CX 2023-06-01

China supplier Hfh-4 Portable Piston Type Air Compressor with Fast Heat Dissipation air compressor portable

Product Description

Product Description

Full range serialization: Adopt the modern concept design of 0.5~0.7Mpa series reciprocating piston air compressor, gather the domestic and foreign micro and small air compressor of new technology.

Technical concentration, excellent overall performance of the machine: The optimized design of the air valve can effectively reduce the exhaust resistance and exhaust temperature, improve the exhaust volume.Reasonable design of aluminum cylinder head, efficient hot fin, achieve fast heat dissipation, effectively reduce exhaust temperature, reduce energy consumption.Adopt inlet load reduction or exhaust load unloading device to effectively reduce energy consumption. The oil spray is formed by striking oil sheet, and the bearing bush and bearing are lubricated.

Close to the actual needs of users: A complete series of products, the displacement from small to large, to meet the different types of starting drill and other pneumatic mechanical air demand.The structure is diverse and suitable for different users.Cheap and good quality, low investment cost.

Technical Data

Product Name	HFH-4
Air Delivery(m3/min)	4
Discharge	0.5
Pressure(mpa)	0.5
Rotate speed(r/min)	970
Cylinder No.	4
Cylinder diameter(mm)	120
Piston stroke(mm)	100
Air tank volume(L)	230
Motor or Diesel engine	LS32 diesel or 18.5kw motor
Cooling way	air cooling
Weight with motor	540
Weighti with diesel engine	580
Length	1900
Width	1070
Height	1260

Company Introduction
Hanfa Group established in 1998 is a key enterprise in the industry of geological exploration and water well field, with the ability to research,manufacture and market. Now, the Group pursues high standard manufacturing and qualified products. It has more than 20 species such as water well drilling rig, core drilling rig, engineering drilling rig, DTH drilling rig, horizontaldirectional drilling rig, etc. These machines are mainly used in geological prospecting, exploration of railway and highway engineering, mining, SPT, water well, geothermal well etc. Some of them won the Scientific and Technical Advance Prize or the National Scientific Research Achievement Prize. All the products have passed the quality system certification of ISO9001:2000 and are national inspection-free products.

1. More than 20 years of experience
The factory is located in ZheJiang Province, China. We are very welcome to visit our factory. If
you need it, we will arrange a pick-up.
2.Top production team
The transportation and packaging will be packaged in international standards. If you have special packaging requirements, we will give you the most suitable solution.
3.Our Service
– New machine provides technical trair.
– Once anything goes wrong with the machine by normal using, our technical person must appear at the first time no matter where you are.
– When the machine should be maintained, you will receive the reminding from us.
– According to different geological conditions, we will recommend different construction plans for you
– Remind you which are wearing parts, so you can prepare enough.
– 24 hours respond to your quality problem.

FAQ
1, Are you trading company or manufacturer?
We are professional manufacturer, and our factory mainly produce water well drilling rig, core drilling rig, DTH drilling rig, piling rig, etc. Our products have been exported to more than 50 countries of Asia, South America, Africa, and get a good reputation in the world.

2, Are your products qualified?
Yes, our products all have gained ISO certificate,and we have specialized quality inspection department for checking every machine before leaving our factory.

3, How about your machine quality?
All of our machines hold the ISO, QC and TUV certificate, and each set of machine must pass a great number of strict testing in order to offer the best quality to our customers.

4, Do you have after service?
Yes, we have special service team which will offer you professional guidance. If you need, we can send our engineer to your worksite and provid the training for your staff.

5, What about the qaulity warranty?
We offer one-year quality warranty for machines’ main body.

6, How long can you deliver the machine?
Generally, we can deliver the machine in 7 days.
Our Customers

Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Cylinder Arrangement:	Parallel Arrangement
Cylinder Position:	Horizontal
Structure Type:	Open Type
Compress Level:	Multistage

Samples:	US$ 10000/Set 1 Set(Min.Order) \| Request Sample

air-compressor

A Buyer’s Guide to Air Compressor Types

Single-stage air compressors

Rotary vane compressors

Rotary vane compressors with low-noise models

Rotary vane compressors with two pistons

China supplier Hfh-4 Portable Piston Type Air Compressor with Fast Heat Dissipation air compressor portable
editor by CX 2023-05-31

China OEM Brushless Equipment Parts Part Screw Oilless Silent Used Portable Oil Free Industrial Mini Max Dental Oil Direct Piston Free Rotary AC Air Pump Compressor air compressor for sale

Product Description

Oilless Air Compressor Featuers:
1.Super Silent
Super low noise.The output air pressure is stable without fluctuations, reducing noise pollution.

2. Safety

If the voltage or current cause the machine overheat, it will automatically shut down to protect from burnout.

3. Automatic control

Pressure switch automatically controls the start and stop of the machine.

4. Adjustable air pressure
The air pressure can be adjusted to meet the needs of different equipment usage.

5. Save human power

Switch on the air compressor can work normally & automatically. It is easy to operate and does not need human to be on duty.

6. Easy maintenance
No need to add any lubricant, easy maintenance after purchase.

Parts Features
1.Heavy cast iron body: heavy load, long stroke, low fuel consumption, low noise

2.Cylinder: made of high-grade cast iron, strength, good lubricity, wall by the fine honing, wear-resistant, durable

3.Piston ring: good elasticity, excellent wear resistance, low oil consumption, not easy to make the valve group carbon deposition and loss of oil to burn the crankshaft and connecting rod.

4.The crankshaft, connecting rod, piston: well balanced, wear resistance, high strength, smooth running balance.

5.High reliable and durable valve; strong aluminum alloy body, light and heat.

6.The motor provides reliable power, low voltage start up and running performance strong fan cooled motor and body; special shock proof design.

7.Double nozzles, were used to direct the exhaust and pressure exhaust; pressure switch with push button, safe and convenient

8.Oil free,silent,protect-environment,suitable for dental use.

Frequency Asked Question

1.Are you the manufacturer or trading company?
We are the manufacturer.

2.Where is your factory?
It is located in HangZhou City,ZHangZhoug Province,China.

3.What’s the terms of trade?
FOB,CFR,CIF or EXW are all acceptable.

4.What’s the terms of payment?
T/T,L/C at sight or cash.

5.What’s the lead time?

In 15 days on receipt of deposit .

6.Do you accept sample order?
Yes,we accept.

7.What about the cost of sample?
You have to pay the freight charge.But the cost of product could be refundable,if you will purchase 1x20GP container in the future.

Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Cylinder Arrangement:	Duplex Arrangement
Cylinder Position:	Vertical
Structure Type:	Open Type
Compress Level:	Double-Stage

Samples:	US$ 80/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

air-compressor

Types of Air Compressors

There are many types of Air Compressors available on the market. Learn which one is right for your needs and what makes one better than another. Find out more about Single-stage models, Oil-free models, and Low-noise models. This article will explain these types and help you decide which one you need. You can also learn about Air Compressors that have single-stage compressors. If you are looking for a high-quality compressor, this article will help you choose a unit.

Air Compressors

Air compressors work by forcing atmospheric air through an inlet valve. As the piston moves down, it pulls atmospheric air into the chamber. As the piston rises, it forces the compressed air out of the cylinder through an exhaust valve. One of the most common types of air compressor is the reciprocating type. Another type of compressor is a single-stage piston. These types of compressors compress air in one stroke – equivalent to the complete rotation of the piston’s crankshaft.
These devices change electrical or mechanical energy into pressurized air. When air is compressed, its volume decreases, increasing its pressure. Air compressors typically have a minimum pressure of 30 bars. The lower pressure band is the range of air pressure. Most compressors are controlled separately, but network controls can be used to interconnect multiple compressors. This type of controller will not work for all types of compressors. There are other types of air compressors that can communicate with each other.
Compressed air has multiple applications in all kinds of industries. In agriculture, it can power pneumatically powered material handling machines for irrigation and crop spraying. Dairy equipments also use compressed air. Compressors are also used in the pharmaceutical industry for mixing tanks, packaging, and conveyor systems. Portable air compressors, which can be powered by diesel fuel, are frequently used at remote drilling sites. Portable air compressors are also commonly used in oil and gas. They can be used to remotely control valves and install reactor rods.
Whether you use an air compressor for agricultural purposes or in a manufacturing setting, there are some features to consider when choosing an air compressor for your needs. A good compressor will have a safety device. It will automatically shut off the input air and output air once sufficient compressing has been achieved. These features will help your air compressor remain efficient and protect your equipment. The safety device is an important feature of any air compressor to increase its overall efficiency.
Vane air compressors are the most common type. They are generally smaller and less powerful than reciprocating piston compressors, so you can use one of these for applications that are under 100 horsepower. The vane air compressors have low compression ratios and high capacities, but they are generally limited to low-power applications. Vane compressors tend to run hot, and they typically have a low compression ratio. It is important to choose the correct oil viscosity for your compressor.
air-compressor

Single-stage models

When comparing single-stage air compressors, look for the term “stages.” Multi-stage compressors use two stages and can handle more capacity and pressure. One stage involves pressurizing air using a piston and a lower-pressure cylinder. This compressed air is then moved to a storage tank. Single-stage models tend to be more energy-efficient than their two-stage counterparts. But if you don’t need a high-pressure cylinder, a single-stage air compressor can be the best choice.
Although single-stage air compressors produce less power, they can produce enough air to power pneumatic tools and other pneumatic equipment. These single-stage units are most useful for smaller-scale home projects and DIY projects. For more industrial purposes, a dual-stage model is the best choice. But if you’re in a hurry, a single-stage unit may be sufficient. Ultimately, it depends on what you plan to do with the air compressor.
Single-stage air compressors feature a single cylinder, one piston stroke for each revolution of pressurized air. Single-stage compressors are typically smaller and more compact, making them a good choice for smaller work environments. Their cfm capacity (cubic feet per minute) is an important indicator of operating capacity. If you plan to use multiple pneumatic tools, you will probably need a higher cfm model. Similarly, the horsepower of single-stage compressors indicates its working capacity. One horsepower moves 550 pounds per foot per minute.
Multi-stage air compressors are generally more expensive and more energy-efficient than single-stage units, but they can offer higher air flow rates. While they may be more complex, they can lower general operating expenses. If you plan on using your air compressor for industrial or commercial use, a dual-stage model might be the best choice. However, if you’re planning to use the air compressor for mass production, a single-stage model may be the best choice.
Single-stage air compressors have the same piston size and number of inlets, while dual-stage models have a smaller first piston and a much longer second piston. Both have a cooling tube in between the two pistons to reduce the air temperature before the second round of compression. The single-stage model is typically small and portable, while the double-stage air compressor is stationary. These compressors can both be stationary and large.

Low-noise models

Despite its name, low-noise models of air compressors are not all the same. The noise level of a compressor can be affected by several factors, including the power source and proximity to the machine. Reciprocal compressors are generally louder than electric ones because of their many moving parts. By contrast, rotary-screw and scroll compressors have fewer moving parts and are quieter.
The noise level of a gas-powered air compressor can be extremely high, making it unsuitable for use indoors. To combat this problem, you can choose an electric model. The noise level of a compressor is primarily caused by motor friction. The cover of a piston is also a major factor in noise, as pistons with minimal covers will produce a lot of noise. Previously, oil was required for a quiet compressor. However, this has changed thanks to the medical industry’s demand for oil-free models.
The CZPT EC28M Quiet Air Compressor is another model that features quiet operation. This air compressor makes 59dB of noise. This level is low enough to allow you to carry on normal conversations while it cycles. In addition, this compressor has an industrial oil-free pump and a 2.8 Amp direct-drive induction motor. These two features make it a great choice for businesses.
Low-noise models of air compressors are available for the construction industry. However, these compressors are not necessarily low-quality, which is why you should consider the noise level of your air tool before purchasing one. The specialists at CZPT can recommend the low-noise models for your particular application and space. Noise can distract people who work near the air compressor. That is why many businesses now opt for these models.
air-compressor

Oil-free models

A number of oil-free models of air compressors are available, but what makes them special? Oil-free compressors don’t contain oil, so they’re lubricated by grease instead. They’re a good choice if you’re working with a small compressor and don’t want to risk damaging it. On the other hand, oil-free models do generate significant amounts of heat, which can damage the compressor. Higher pressure can grind the compressor against itself, or even warp it.
A few words of knowledge can help you choose the best oil-free air compressor for your needs. For example, a compressor’s horsepower is a measurement of how powerful the motor is. Higher horsepower means a higher PSI or ACFM. You can also use the ACFM to compare the two. Scroll technology is a modern air compression system that uses a stationary and mobile spiral. This reduces the volume of air in the compressor by directing it to the center.
Purchasing an oil-free air compressor doesn’t have to be a daunting task, though. A good distributor can advise you on what type of oil-free air compressor is right for you. This way, you can save money and enjoy peace of mind while using your air compressor. And, of course, the best way to get a great deal on an air compressor is to speak to a distributor who is knowledgeable about the products available.
An oil-free air compressor is a great option for businesses that are sensitive to the contamination of air. For example, in the pharmaceutical and food industry, a minuscule oil could spoil a product or even damage production equipment. Oil-free air compressors generally have lower maintenance costs than oil-flooded models because there are fewer moving parts. Because of this, oilless air compressors require fewer maintenance and may still need to be replaced occasionally.
A few advantages of an oil-free air compressor over an oil-lubricated one include lower noise levels. Oil-free air compressors tend to be less noisy and run more quietly than oil-injected ones, but you should still carefully weigh the pros and cons before making a decision. Also, consider how much you use your air compressor before choosing a model. The pros outweigh the cons. In the end, you’ll be glad you chose an oil-free air compressor.

China OEM Brushless Equipment Parts Part Screw Oilless Silent Used Portable Oil Free Industrial Mini Max Dental Oil Direct Piston Free Rotary AC Air Pump Compressor air compressor for sale
editor by CX 2023-05-30

China Best Sales Piston Belt Driven Air Compressor with Tank supplier

Product Description

Item: Piston belt driven air compressor with tank

FEATURES

(1)Belt-driven air compressors

(2)Powerful cast iron pump,big horse power for using

(3)Best choice for factories

(4)Metal cover for protecting the belt and wheels

(5)Various pumps can be matched with different tank capacity for choices of customers

Packaging & Delivery

Packaging Details : CARTON
Loading Port: ZheJiang
Lead Time: 25-35 days after receiving the payment.

portable compressor

Details

Iron handle for easy carrying.
Stable operation with of twin wheel and twin suction feet..

Shipping Cost: Estimated freight per unit.	To be negotiated\| Freight Cost Calculator

Shipping Cost:

Estimated freight per unit.

To be negotiated|

Freight Cost Calculator

After-sales Service:	Spare Parts
Warranty:	1 Year
Lubrication Style:	Lubricated

Customization:	Available \|

air-compressor

The Air Compressor Is a Versatile Tool

Oil-injected

Oil-free

Gasoline

Electricity

Variable frequency drive

China Best Sales Piston Belt Driven Air Compressor with Tank supplier
editor by CX 2023-05-29

Product Description

2.Q: Are you trading company or manufacturer ?

Choosing the Right Air Compressor For Your Home

Positive displacement

Oil-free

Single-stage

CFM

PSI

Power source

Product Description

Choose an Air Compressor for Your Business

Positive displacement

Single-stage

low noise

Product Description

Choosing an Air Compressor

Positive displacement

Oil-injected

Oil-free

Single-stage

Low-noise

Product Description

A Buyer’s Guide to Air Compressor Types

Single-stage air compressors

Rotary vane compressors

Rotary vane compressors with low-noise models

Rotary vane compressors with two pistons

Product Description

Advantages

Control Panel

Air Filter

The Air Compressor Is a Versatile Tool

Oil-injected

Oil-free

Gasoline

Electricity

Variable frequency drive

Product Description

Choosing an Air Compressor

Positive displacement

Oil-injected

Oil-free

Single-stage

Low-noise

Product Description

Wholesale Medical Air Comperssor 40L for Dental and Silent Air Compressor

Product Description

Choosing an Air Compressor

Positive displacement

Oil-injected

Oil-free

Single-stage

Low-noise

Product Description

A Buyer’s Guide to Air Compressor Types

Single-stage air compressors

Rotary vane compressors

Rotary vane compressors with low-noise models

Rotary vane compressors with two pistons

Product Description

In 15 days on receipt of deposit . 6.Do you accept sample order?Yes,we accept. 7.What about the cost of sample? You have to pay the freight charge.But the cost of product could be refundable,if you will purchase 1x20GP container in the future.

Types of Air Compressors

Air Compressors

Single-stage models

Low-noise models

Oil-free models

Product Description

The Air Compressor Is a Versatile Tool

Oil-injected

Oil-free

Gasoline

Electricity

Variable frequency drive

In 15 days on receipt of deposit .

6.Do you accept sample order?
Yes,we accept.

7.What about the cost of sample?
You have to pay the freight charge.But the cost of product could be refundable,if you will purchase 1x20GP container in the future.